Without lubricating, compact structure, high strength, long service life,
No rotation gap, not affected by temperature and oil pollution, acid resistance, alkali resistance and corrosion resistance,
Suitable for shafting transmission at high temperature, high speed and corrosive working conditions
Light weight, small size, and easy assembly and disassembly. Can be assembled and disassembled without moving the machine (refers to the type with intermediate shaft)
Stepper Disc Coupling installation tips:
1. When installing the coupling, be sure had done strict calibration adjustments. It is recommended to use the concave-convex method to center the two axes, or use a square ruler to stick to the outer periphery of the diaphragm coupling, and check with two points separated by about 90 degrees to ensure the highest concentricity of the coupling. Otherwise, the service life of the aluminum alloy diaphramg coupling will be greatly affected depending on the centering accuracy.
2. In order to avoid accidents during installation, please be sure to cut off the power
3. When installing this stepper disc coupling, please remove dust attached to the mounting shaft and the surface of the coupling.
4. In order to performance well. When there are two or more than two deviation values occur at the same time during the installation process, the allowable value should less than half of it .